USB C Type-C 9V 12V 15V 20V PD Trigger 3ft Power Cable 5A DC 5.5 x 2.1mm
Power all kinds of electronic devices with USB-C chargers and power banks Performs PD or QC power negotiation • Supports up to 5A Not all USB-C power supplies can support all voltages • If the power supply does not support the requested voltage then the next lowest voltage will be provided • The cable just performs the PD negotiation and passes the output Length: 3 Feet / 1 Meter • Max Current: 5A • Supports PD2.0/3.0, QC2.0/3.0/4.0 • 5A E-Mark Fast shipping from USA Orders under $10 ship without tracking If you need tracking on orders under $10 then pay the extra $1.99 for package service
USB-C PD Type-C DC Fixed Voltage Power Trigger Module 9V 12V 15V 20V 5A Female
20V version can be converted to 5V/9V/12V/15V by soldering pads as shown in the photos Power an electronic project or convert old hardware to use USB-C power input Performs PD power negotiation • Supports up to 5A Not all USB-C power supplies can support all voltages • If the power supply does not support the requested voltage then the next lowest voltage will be provided • The module just performs the PD negotiation and passes the output In order to use over 3A you will need to use an electronically marked Type-C cable • A real USB PD power source is required, will not work with QC-only chargers
USB C Type-C 9V 12V 15V 20V PD Trigger 4ft Power Cable 5A DC 5.5 x 2.5mm
Power all kinds of electronic devices with USB-C chargers and power banks Performs PD or QC power negotiation • 18AWG Copper Wire • Quality Molded Connectors Not all USB-C power supplies can support all voltages • If the power supply does not support the requested voltage then the next lowest voltage will be provided • The cable just performs the PD negotiation and passes the output Length: 4 Feet / 1.2 Meters • Supports PD2.0/3.0, QC4.0 • Contains an e-mark chip that enables 5A support Fast shipping from USA Orders under $10 ship without tracking If you need tracking on orders under $10 then pay the extra $1.99 for package service
3/4″ (19mm) Momentary Push Button Starter Switch / Boat Horn Metal w/ Power LED
Installation: Cut mounting hole in the panel using a 3/4″ drill bit. The switch and LED are separate. Thread Depth: 17mm.
19mm 12V Latching Push Button Power Switch Black Metal Blue LED Waterproof
Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles.
19mm 12V LED ON OFF Push Button Power Switch Latching/Momentary with Wire Socket
19mm 12V LED ON OFF Push Button Power Switch Latching/Momentary with Wire Socket Product parameters: Color options: blue, red, Switch rating: 3A/250VACPanel thickness: 1-10mmProtection level: IP65, IK10Installation cutting hole: 19mmOperation type: Locking/ Momentary (optional) Switch contact: 1NO 1NCLED rating: 12VLED mode: ring indicatorContact material: silver alloyHigh-quality metal materials and IP67 waterproof protection can be used in humid or dusty environments. Same day shipping from NY state.
10pcs TP4056 5V 1A USB Type-C USB-C Lithium Battery Charging & Protection Board
10pcs TP4056 5V 1A USB Type-C USB-C Lithium Battery Charging & Protection Board Dual Function: 1) Charge lithium cells from a 5V power source 2) Protect battery from over-discharge and over-current Charge input: 5V DC • Maximum charge current: 1000mA • Charge cut-off: 4.2V Discharge protection cut-off: 2.5V • Over-current protection cut-off: 3A USB-C input • Size: 2.6×1.7cm This is an enhanced USB-powered module for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. This module provides constant-current/constant-voltage (CC/CV) charging, along with protection against over-voltage, over-discharge, over-current and short circuits to protect the battery and the device that it is powering. The device to be powered by the battery is connected to the module's OUT+ and OUT- connectors and the battery is connected to the B+ and B- connections. When connected to USB power, the module provides up to 1A charge current until the battery is charged, then switches to a constant voltage mode to keep it charged. During use, if the battery voltage drops below about 2.4V, the DW01A protection IC disconnects the battery from the OUT connectors, disabling discharge to protect the battery from running at too low and self-destructing. When the module is then connected to USB power, it will trickle charge the battery to 2.9V (the over-discharge release voltage), at which point the charge current will be linearly increased to 1A maximum and the module will reconnect the battery to the OUT connections, allowing discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows trickle charging of the battery to occur. The module also protects against overcurrent and short-circuit protection – it will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs. This module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s and 18650s that don't have their own protection circuit. It can charge two cells in parallel, however since the two cells share the charging current, they take twice as long to charge as a single cell. The USB port is for charging only. Product Guarantee We offer a 30 day return policy and a one year warranty. Buy with confidence! Item Location All orders ship from Indianapolis, IN, USA Same Item in Other Lot Sizes 2 Pack $3.99 Free shipping