PRO SEAL EASY SEAL Proseal XL4 Direct Inject 1.5-5 Ton Applications – 3 Pack
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.Unlike most other products on the market, ProSeal XL4 with Dye travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.*DO NOT use in ammonia systems.Eliminate the tedius, and time consuming process of “pumping down the unit”.Simply Connect and Inject.Enviro-Safe’s ProSeal XL4 Inject is:ConcentratedCompatible with all refrigerant, except ammoniaCompatible with all oilsNo need to pump down R410, or other unitsLarge equipment, bulky tools, injection hoses are a thing of the pastFor Use In:heat pumpssplit systems & mini split unitspackaged unitsmicrochannel coilsEnviro-Safe ProSeal XL4 Inject is currently available in three sizes: Fractional – 1.5 Ton unit, 1.5 – 5 Ton units, and 6-30 ton units. These items are also available in Bulk:boxed quanititesnon-boxed quanitites.contractors pack of 3 is packaged in mylar packing and will include instructions.
Nu Calgon Easy Seal Large System with UV Dye 4050-11 2 to 7.5 Tons 3 Pack
You are buying 3 sealed easy seals.
Leak Saver Direct Inject Refrigerant Leak Sealer for HVAC and Automotive Systems
LEAK SAVER DIRECT INJECT – FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW) THE MOST TRUSTED – 2022 Improved Formulation! The numbers don’t lie! With more the 4,000,000 units sold of this sealant formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100% PERMANENTLY SEALS LEAKS – The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks. If you suspect your system to have moisture, we recommend that you to first inject our Leak Saver Dry. WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more. STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below. SAFE FOR ALL TOOLS AND PARTS – The Leak Saver is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. REAL USA HVAC TECH SUPPORT – We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us directly. FREE SHIPPING to the continental USA.
Proseal with Leak Detector for 134a Automotive Systems
Enviro-Safe Proseal with Leak Detector finds and repairs minor leaks in mobile a/c systems. It seals leaks in evaporators, condensers, fittings and metal lines. Our highly concentrated, fluorescent yellow dye and allows the dye to be highly visible, and in most cases, able to be seen with the naked eye. However, the use of a blacklight as well as UV glasses does make it much more visible. Before replacing expensive parts and labor, try Enviro-Safe Proseal with Leak Detector! Works on most mobile applications. Applications: automotive, campers, semi tractor trailers, combines, thrashers, agriculture applications. For best results, use Enviro-Safe Prodry BEFORE using the Enviro-Safe Proseal to remove any moisture in your system. Moisture is corrosive and no one wants that in their system! DO NOT USE IN AMMONIA SYSTEMS! Do NOT use this item in a R410a system.
Leak Saver Direct Inject ULTIMATE for AC, Refrigeration, and Automotive – 3 PACK
LEAK SAVER DIRECT INJECT ULTIMATE – 3 PACK – FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW) 3 in 1 SEALANT + MOISTURE REMOVER + UV DYE – Our proven leak sealant now includes moisture remover and UV dye for the complete system treatment! Now, you can seal your leak, remove system moisture, or find large leaks with the UV Dye…all in one easy to install package! THE MOST TRUSTED – The numbers don’t lie! With more than 3,000,000 units sold of this sealant formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100%. PERMANENTLY SEALS LEAKS – The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 7 days. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks. If you suspect your system to have moisture, we recommend that you to first inject our Leak Saver Dry. WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more. STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kit. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below. SAFE FOR ALL TOOLS AND PARTS – The Leak Saver is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. REAL USA HVAC TECH SUPPORT – We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us. PRODUCT DETAILS: Works with all types of refrigerants (Freon 410A, R22, 404A, 134A, etc).3 in 1 – Sealant + Moisture Remover + UV DyeFor systems up to 5 Tons. If the leak does not empty the system within 72 hours, the Leak Saver will typically seal the leak.Super concentrated (less material in the system).Travels with the gas to seal leaks faster and more effectively.Safe for manifold gauges, expansion valves, or capillary tubes.Proudly made in the USA.Click HERE for our videos on how to easily install the Leak Saver.For use in: Split Systems, Mini Splits, Packaged Units, Micro-Channel Coils, Heat Pumps, Commercial Unit Coolers, Refrigeration Systems, and more
Leak Saver Direct Inject ULTIMATE for AC, Refrigeration, and Automotive – 6 PACK
LEAK SAVER DIRECT INJECT ULTIMATE – 6 PACK – FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW) 3 in 1 SEALANT + MOISTURE REMOVER + UV DYE – Our proven leak sealant now includes moisture remover and UV dye for the complete system treatment! Now, you can seal your leak, remove system moisture, or find large leaks with the UV Dye…all in one easy to install package! THE MOST TRUSTED – The numbers don’t lie! With more than 3,000,000 units sold of this sealant formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100%. PERMANENTLY SEALS LEAKS – The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 7 days. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks. If you suspect your system to have moisture, we recommend that you to first inject our Leak Saver Dry. WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more. STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kit. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below. SAFE FOR ALL TOOLS AND PARTS – The Leak Saver is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system. REAL USA HVAC TECH SUPPORT – We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us. PRODUCT DETAILS: Works with all types of refrigerants (Freon 410A, R22, 404A, 134A, etc).3 in 1 – Sealant + Moisture Remover + UV DyeFor systems up to 5 Tons. If the leak does not empty the system within 72 hours, the Leak Saver will typically seal the leak.Super concentrated (less material in the system).Travels with the gas to seal leaks faster and more effectively.Safe for manifold gauges, expansion valves, or capillary tubes.Proudly made in the USA.Click HERE for our videos on how to easily install the Leak Saver.For use in: Split Systems, Mini Splits, Packaged Units, Micro-Channel Coils, Heat Pumps, Commercial Unit Coolers, Refrigeration Systems, and more
Leak Saver Direct Inject Refrigerant Leak Sealer 3 Pack HVAC & Automotive
HVAC Professionals 3 Pack Bundle (Bulk Packaging Mylar) LEAK SAVER DIRECT INJECT 3 PACK – FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW)THE MOST TRUSTED – 2022 Improved Formulation! The numbers don’t lie! With more the 4,000,000 units sold of this sealant formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100%PERMANENTLY SEALS LEAKS – The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks. If you suspect your system to have moisture, we recommend that you to first inject our Leak Saver Dry.WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kit for our videos on how to easily install the Leak Saver.Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below. SAFE FOR ALL TOOLS AND PARTS – The Leak Saver is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system.REAL USA HVAC TECH SUPPORT – We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us directly.FREE SHIPPING to the continental USA. Leak Saver Direct Inject – For systems up to 5Tons. Proven Formula This is the same sealant formula proven in over ONE MILLION successful applications! Seals small refrigerant leaks permanently and prevents future leaks. Easiest Applicator Just CHARGE it in! No messy syringes, fussy hoses, or pressure sensitive cans. The Leak Saver can also be used in multiples for larger systems. Product Details: Works with all types of refrigerant (Freon 410A, R22, 404A, 134A, etc) For systems up to 5 Tons. If the leak does not empty the system within 72 hours, the Leak Saver will typically seal the leak. Super concentrated (less material in the system). Travels with the gas to seal leaks faster and more effectively. Safe for manifold gauges, expansion valves, or capillary tubes. Proudly made in the USA. Click HERE for our videos on how to easily install the Leak Saver. For use in: Split Systems, Mini Splits, Packaged Units, Micro-Channel Coils, Heat Pumps, Commercial Unit Coolers, Refrigeration Systems, and more. Note 1: Not for use in Ammonia systems. Note 2: The date on the top of the mylar bag is the sealant production batch information. A date on the middle of the bag is the mylar bag (military grade) production batch information.
Leak Saver Direct Inject Refrigerant Leak Sealer 6 Pack HVAC & Automotive
HVAC Professionals 3 Pack Bundle (Bulk Packaging Mylar) LEAK SAVER DIRECT INJECT 3 PACK – FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW)THE MOST TRUSTED – 2022 Improved Formulation! The numbers don’t lie! With more the 4,000,000 units sold of this sealant formula since 2015, we are the most trusted leak sealant among HVAC professionals. Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100%PERMANENTLY SEALS LEAKS – The Leak Saver can permanently seal small refrigerant leaks where the complete refrigerant charge is not lost within 72 hours. It works similarly to how blood in your body reacts to a cut. When a leak occurs, the Leak Saver reacts with the air and moisture at the leak site to permanently seal the leak. When used for preventative maintenance, the active ingredient circulates safely in the system to seal future leaks. If you suspect your system to have moisture, we recommend that you to first inject our Leak Saver Dry.WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kit for our videos on how to easily install the Leak Saver.Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below. SAFE FOR ALL TOOLS AND PARTS – The Leak Saver is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system.REAL USA HVAC TECH SUPPORT – We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us directly.FREE SHIPPING to the continental USA. Leak Saver Direct Inject – For systems up to 5Tons. Proven Formula This is the same sealant formula proven in over ONE MILLION successful applications! Seals small refrigerant leaks permanently and prevents future leaks. Easiest Applicator Just CHARGE it in! No messy syringes, fussy hoses, or pressure sensitive cans. The Leak Saver can also be used in multiples for larger systems. Product Details: Works with all types of refrigerant (Freon 410A, R22, 404A, 134A, etc) For systems up to 5 Tons. If the leak does not empty the system within 72 hours, the Leak Saver will typically seal the leak. Super concentrated (less material in the system). Travels with the gas to seal leaks faster and more effectively. Safe for manifold gauges, expansion valves, or capillary tubes. Proudly made in the USA. Click HERE for our videos on how to easily install the Leak Saver. For use in: Split Systems, Mini Splits, Packaged Units, Micro-Channel Coils, Heat Pumps, Commercial Unit Coolers, Refrigeration Systems, and more. Note 1: Not for use in Ammonia systems. Note 2: The date on the top of the mylar bag is the sealant production batch information. A date on the middle of the bag is the mylar bag (military grade) production batch information.